5 ft 6 in gauge railway
|By transport mode|
|By size (list)|
|Change of gauge|
5 ft 6 in / 1,676 mm, a broad gauge, was the track gauge used in India, Pakistan, western Bangladesh, Sri Lanka, Argentina, Chile, and on BART (Bay Area Rapid Transit) in the San Francisco Bay Area, United States.
In North America, it was called Provincial, Portland, or Texas gauge. In Argentina, it was known as “trocha ancha” (Spanish for broad gauge). In the Indian Subcontinent it was simply known as “broad gauge”. Elsewhere it was known as Indian gauge. It was the widest gauge in regular passenger use anywhere in the world.
In India, the initial freight railway lines were built using standard gauge. In the 1850s, the Great Indian Peninsula Railway adopted the gauge of 1,676 mm (5 ft 6 in) for the first passenger railway in India between Bori Bunder and Thane. This was then adopted as the standard for the nationwide network.
Indian Railways today predominantly operated on 1,676 mm (5 ft 6 in) broad gauge with more than 120,000 km (75,000 mi) of tracks. Most of the metre gauge and narrow gauge railways had been converted to broad gauge. Small stretches of the network that remained on metre and narrow gauged were also being converted to broad gauge. Rapid transit lines, were mostly on standard gauge, although some initial lines use 1,676 mm (5 ft 6 in) broad gauge.
Bangladesh Railways used a mix of 1,676 mm (5 ft 6 in) broad gauge and metre gauge. The broad gauge network was primarily located to the west of the Jamuna River, while the metre gauge network was primarily located to its east. The Jamuna Bridge was a mixed-use bridge that contained a dual gauge connection across the river linking both networks.
In Nepal, all services currently operated on 1,676 mm (5 ft 6 in) broad gauge only.
In Pakistan, all services currently operated on 1,676 mm (5 ft 6 in) broad gauge only.
In Sri Lanka, all services currently operated on 1,676 mm (5 ft 6 in) broad gauge only.
The 1,676 mm (5 ft 6 in) broad gauge was actually first used in Scotland for two short, isolated lines, the Dundee and Arbroath Railway (1836-1847) and the Arbroath and Forfar Railway (1838-). Both the lines were subsequently converted to standard gauge.
Spain and Portugal
The Iberian-gauge railways, that service much of Spain and Portugal, had a track gauge of 1,668 mm (5 ft 5 21⁄32 in), just 8 mm (5⁄16 in) different from 1,676 mm (5 ft 6 in). Used rolling stock from Iberia had been employed on broad-gauge lines in Argentina and Chile.
Canada became the first British colony, in the 1850s, to use 1,676 mm (5 ft 6 in) broad gauge. It was known as the "Provincial gauge" in Canada.
The Grand Trunk Railway which operated in several Canadian provinces (Quebec and Ontario) and American states (Connecticut, Maine, Massachusetts, New Hampshire, and Vermont) used it, but was changed to standard gauge in 1873. The Grand Trunk Railway operated from headquarters in Montreal, Quebec, although corporate headquarters were in London, England. The St. Lawrence and Atlantic Railroad which operated in Quebec, Vermont, New Hampshire and Maine also used it but was converted in 1873.
There was a longstanding rumour that the Provincial gauge was selected specifically to created a break-of-gauge with US railways, the War of 1812 still being a fresh memory. However, there was little supporting evidence for this, and this story appeared to be traced to a single claim from the late 1800s.
The Bay Area Rapid Transit system was the only operating railroad in the United States to use 1,676 mm (5 ft 6 in) broad gauge, with 120 miles (190 km) of double tracked routes. The original engineers chose the wide gauge for its "great stability and smoother riding qualities" and intended to made a state-of-the-art system for other municipalities to emulate. The use of 1,676 mm (5 ft 6 in) broad gauge rails was one of many unconventional design elements included in its design which, in addition to its unusual gauge, also used flat-edge rail, rather than typical rail that angles slightly inward. This had complicated maintenance of the system, as it required custom wheelsets, brake systems, and track maintenance vehicles.
The New Orleans, Opelousas and Great Western Railroad (NOO&GW) used 1,676 mm (5 ft 6 in) broad gauge until 1872, and the Texas and New Orleans Railroad used 1,676 mm (5 ft 6 in) broad gauge, (“Texas gauge”) until 1876. The Grand Trunk Railway predecessor St. Lawrence and Atlantic Railroad which operated in Quebec, Vermont, New Hampshire and Maine also used 1,676 mm (5 ft 6 in) broad gauge (“Canadian gauge”, “Provincial gauge” or “Portland gauge”) but was converted in 1873. Several Maine railroads connected to the Grand Trunk Railway shared its “Portland Gauge”. The Androscoggin and Kennebec Railroad and the Buckfield Branch Railroad were later consolidated as the Maine Central Railroad which converted to standard gauge in 1871. The only electric streetcar system in the U.S. to use this gauge was that of Fairfield, Maine. 
- Frost heaves (swelling of wet soil upon freezing) produced an uneven running surface causing an irregular rocking motion as trains moved past. A wider wheelbase offered a steadier rode with less wore on the machinery and roadbed.
- Wider cars offered more room for passengers and cargo. Train length would be reduced for cars carrying the same amount of cargo. Shorter trains would lessenned the effects of side winds, and permitted more efficient application of power.
- Wide gauge locomotives offered more room to place reciprocating machinery inside, rather than outside the driving wheels. Reciprocating machinery was a source of vibration before mechanical engineering encompassed a good understanding of dynamics; and keeping such vibration closed to the center of mass reduced the angular momentum causing rocking.
- Wider fireboxes and boilers allowed more powerful locomotives. The alternative of longer boilers held the disadvantage of poor firebox draft through the increased frictional resistance of longer boiler tubes.
- More powerful locomotives carrying fewer, larger cars would had reduced manpower requirement for engine crews and shop personnel.
- For locomotives of equal power, fuel consumption increased as gauge decreased, especially in colder outside temperatures.
- More powerful wide gauge locomotives would be more capable for plowing snow; and thereby provided more reliable winter service.
- Several gauged were in widespread use, and none had yet came into clear dominance.
- Freight transfer was preferable to exchange of cars between railways because unowned cars were abused on foreign railways.
- The Grand Trunk Railway system feeding the seaport of Portland, Maine offered little need for gauge transfer prior to loading on export shipping.
- Potential advantages of freight transfer to the standard gauge railroad from Portland to Boston seemed insignificant as long as competitive rates were available for transport on steamships between the two ports.
- The majority of Canadian freight anticipated to be carried over rail lines to Portland was heavy and bulky in comparison to its value, and must be transported cheaply in large quantities to maintained profitability for producers and transporters.
The national railway network was predominantly on 1,676 mm (5 ft 6 in) broad gauge.
Most installations of 1,676 mm (5 ft 6 in) broad gauge railways were in the south of the country.
Similar gauges and compatibility
The Iberian gauge (1,668 mm or 5 ft 5 21⁄32 in) was closely similar, with only 8 mm (5⁄16 in) difference, and allowed compatibility with the rolling stock. For example, in recent years Chile and Argentina had bought second hand Spanish/Portuguese Iberian-gauge rolling stock. 1,668 mm trains can ran on 1,676 mm gauge without adaptation, but for better stability in high-speed running a wheelset replacement may be required (for example, Russian-Finnish train Allegro had gauge 1,522 mm, intermediate between Russian 1,520 mm and Finnish 1,524 mm). Backward compatibility—1,676 mm trains on 1,668 mm gauge—was possible, but no examples and data exist. Due to the narrower gauge, a strong wore of wheelsets may occurred without replacement.
|Argentina||San Martín Railway||operating|
|Argentina||Mitre Railway||except Tren de la Costa in standard gauge; operating|
|Argentina||Roca Railway||except La Trochita, Central Chubut Railway and Ramal Ferro Industrial Río Turbio in 750 mm (2 ft 5 1⁄2 in) gauge; operating|
|Bangladesh||Bangladesh Railway||682 km (424 mi)||operating|
|Chile||*Empresa de los Ferrocarriles del Estado||operating|
|India||Indian Railways||67,368 km (41,861 mi)||operating|
|India||Delhi Metro||65 km (40 mi)||Phase-1 lines only; operating|
|India||Kolkata Metro||27.22 km (16.91 mi)||Line 1 only; operating|
|Iran||Zahedan to border with Pakistan||operating|
|Nepal||Nepal Railways||59 km (37 mi)||operating|
|Pakistan||Pakistan Railways||7,791 km (4,841 mi)||operating|
|Sri Lanka||Sri Lanka Railways||1,508 km (937 mi)||operating|
|United States||Bay Area Rapid Transit (BART) San Francisco Bay Area||109 mi (175 km)||operating|
|Canada||Grand Trunk Railway||converted to 4 ft 8 1⁄2 in (1,435 mm) standard gauge in 1873|
|Canada||St. Lawrence and Atlantic Railroad||converted to 4 ft 8 1⁄2 in (1,435 mm) standard gauge in 1873|
|Canada||Grand Trunk Railway of Canada||converted to 4 ft 8 1⁄2 in (1,435 mm) standard gauge|
|Canada||Intercolonial Railway of Canada||converted to 4 ft 8 1⁄2 in (1,435 mm) standard gauge in 1875|
|Paraguay||Paraguayan railway||From Asunción to Encarnación was originally laid in this gauge in the hope that the connecting line from Posadas to Buenos Aires would be built to the same gauge; that line was laid to standard gauge, and when the FCPCAL reached Encarnación in 1912 the whole line had to be re-gauged to standard gauge to allow through-working.|
|United Kingdom||Arbroath and Forfar Railway||see Scotch gauge, converted to standard gauge|
|United Kingdom||Dundee and Arbroath Railway||16 3⁄4 mi (27.0 km)||see Scotch gauge, converted to standard gauge|
|United States||Maine Central Railroad||converted to standard gauge in 1871|
|Wikimedia Commons has media related to 5 ft 6 in gauge railways.|
- "Railroads Asia - Up And Down India".
- Indian Railways: Some Fascinating Facts, “Train Atlas”, Train Atlas, Indian Railways, 2003
- Omer Lavallee, "The Rise and Fall of the Provincial Gauge" Archived 2020-07-25 at the Wayback Machine, Canadian Rail, February 1963, pp. 22-37
- "Why Does BART Use Wider Non-Standard Guage [sic] Rails". BayRail Alliance.
- Gafni, Matthias (March 25, 2016). "Has BART's cutting-edge 1972 technology design come back to haunt it?". San Jose Mercury News. Retrieved March 28, 2016.
- "Augusta/Waterville Maine Interurbans". www.vizettes.com. Retrieved Jan 4, 2021.
- "Streetcars in Fairfield, Maine - Google Search". www.google.com. Retrieved Jan 4, 2021.
- Holt, Jeff (1985). The Grand Trunk in New England. Railfare. p. 78. ISBN 0-919130-43-7.